Sun Oracle SPARC T3-2, Service Manual

Page: 69 / 222

Detecting and Managing Faults 57
2. Reset the server so that the ASR command takes effect.
Note –
In the ILOM shell there is no notification when the system is actually
powered off. Powering off takes about a minute. Use the
show /HOST
command to
determine if the host has powered off.
Related Information
■
“View the System Message Log Files” on page 37
■
“Display System Components” on page 56
■
“Enable System Components” on page 57
▼
Enable System Components
You enable a component by setting its
component_state
property to
Enabled
.
This removes the component from the ASR blacklist.
1. At the
->
prompt, set the
component_state
property to
Enabled
.
2. Reset the server so that the ASR command takes effect.
Note – In the ILOM shell there is no notification when the system is actually
powered off. Powering off takes about a minute. Use the
show /HOST
command to
determine if the host has powered off.
-> stop /SYS
Are you sure you want to stop /SYS (y/n)? y
Stopping /SYS
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
-> set /SYS/MB/CMP0/BR1/CH0/D0 component_state=Enabled
-> stop /SYS
Are you sure you want to stop /SYS (y/n)? y
Stopping /SYS
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS