74
Sun Fire T2000 Server Service Manual • October 2005
FIGURE 4-4
Removing the Front Bezel from the Server Chassis
4. Remove the front bezel from the chassis (
FIGURE 4-4
).
The bezel is held in place by a mounting tab and four fasteners that clamp the bezel
to the chassis.
5. While holding the fan cover open, slide the top front cover forward to disengage
it from the chassis
.
6. Lift the top front cover from the chassis.
Removing and Replacing FRUs
This section provides procedures for replacing the following field replaceable parts
(FRUs) inside the server chassis:
■
“To Remove PCI-E and PCI-X Cards” on page 75
and
“To Replace PCI Cards” on
page 77
■
“To Remove DIMMs” on page 77
and
“To Replace DIMMs” on page 79
■
“To Remove the System Controller” on page 82
and
“To Replace the System
Controller Board” on page 83
■
“To Remove the Motherboard Assembly” on page 84
and
“To Replace the
Motherboard Assembly” on page 88
■
“To Remove the Power Distribution Board” on page 90
and
“To Replace the
Power Distribution Board” on page 92
Summary of Contents for Netra T2000
