Chapter 4
Replacing Cold Swappable FRUs
95
▼
To Remove the Fan Power Board
1. Perform the procedures described in
“Common Procedures for Parts
Replacement” on page 67
.
2. Remove all three fans.
See
“To Remove a Fan” on page 57
)
3. Remove the screw that secures the fan power board to the chassis (
FIGURE 4-22
).
4. Slide the fan power board to the right to disengage it from the front I/O board.
5. Remove the fan power board from the front fan bay and place the board on an
antistatic mat.
FIGURE 4-22
Removing the Fan Power Board
Summary of Contents for Netra T2000
