Sun Microsystems Netra CT 820, Service Manual

Page: 5 / 132

Contents v
6.1 Removing and Installing Power Supplies 6–1
6.1.1 Removing a Power Supply 6–2
6.1.2 Installing a Power Supply 6–3
6.2 Removing and Installing Fan Trays 6–4
6.2.1 Removing a Fan Tray 6–4
6.2.2 Installing a Fan Tray 6–5
6.3 Removing and Installing the Air Filter 6–6
6.3.1 Removing the Air Filter 6–6
6.3.2 Installing the Air Filter 6–7
7. Removing and Replacing Cold-Swappable Subassemblies 7–1
7.1 Removing and Installing the Rear Transition Card for the Distributed
Management Card
7–1
7.1.1 Removing a Rear Transition Card for the Distributed Management
Card
7–1
7.1.2 Installing the Rear Transition Card for the Distributed Management
Card
7–3
7.2 Removing and Installing the Midplane 7–4
7.2.1 Removing the Midplane Assembly 7–4
7.2.2 Installing the Midplane Assembly 7–6
8. Illustrated Parts Breakdown 8–1
8.1 FRUs Located at the Front of the System 8–1
8.2 FRUs Located at the Rear of the System 8–3
A. Board Connector Pinouts A–1
A.1 Distributed Management Card Pinouts A–2
A.1.1 Console Port Pinouts A–3
A.2 Rear Transition Module for the Distributed Management Card Pinouts A–
4
A.2.1 Console Ports 1A and 1B Pinouts A–5