Sun Microsystems Netra CT 820, Service Manual

Page: 9 / 132

ix
Figures
FIGURE 1-1
Location of ESD Ground Jack on Netra CT 820 Server (Front) 1–2
FIGURE 1-2
Location of ESD Ground Jack on Netra CT 820 Server (Rear) 1–3
FIGURE 2-1
DC Power Input Panel 2–2
FIGURE 4-1
Main SunVTS Window 4–10
FIGURE 4-2
ipmitest
Dialog Box 4–11
FIGURE 4-3
Top Half of the DMC-Active(
dmcatest
) Test Parameter Options Dialog Box 4–12
FIGURE 4-4
Bottom Half of the DMC-Active(
dmcatest
) Test Parameter Options Dialog Box 4–13
FIGURE 4-5
Top Half of the DMC-Standby(
dmcstest
) Test Parameter Options Dialog Box 4–14
FIGURE 4-6
Bottom Half of the DMC-Standby(
dmcstest
) Test Parameter Options Dialog Box 4–15
FIGURE 5-1
Injector/Ejector Operation for Board-Level Components 5–2
FIGURE 5-2
Distributed Management Card Ports 5–4
FIGURE 5-3
Location of the Hot-Swap LED on the Switching Fabric Board 5–7
FIGURE 5-4
Ports on the Rear Transition Card for the Switching Fabric Board 5–9
FIGURE 5-5
Location of the Hot-Swap LED on the Netra CP2300 Board 5–13
FIGURE 5-6
Rear Transition Card for the Netra CP2300 Transition Card Connectors 5–14
FIGURE 5-7
Location and Default Settings of the SW503 DIP Switch 5–17
FIGURE 6-1
Power Supply Orientation 6–2
FIGURE 6-2
Injector/Ejector Operation (Power Supplies) 6–3
FIGURE 6-3
Fan Tray Installation and Removal 6–5
FIGURE 6-4
Intake Grill and Air Filter 6–6