Sun Microsystems Netra CT 820, Service Manual

Page: 14 / 132

xiv Netra CT 820 Server Service Manual • July 2004
How This Book Is Organized
Chapter 1 describes the procedures you need to perform before installing, removing,
or replacing field-replaceable units (FRUs) in a Netra CT 820 server.
Chapter 2 gives the hardware and software procedures for powering the Netra CT
820 server on and off.
Chapter 3 provides instructions for handling the cPSB cards and assemblies
correctly.
Chapter 4 provides troubleshooting procedures for the Netra CT 820 server.
Chapter 5 gives instructions for removing and replacing hot-swappable cards.
Chapter 6 gives instructions for removing and replacing hot-swappable
subassemblies.
Chapter 7 gives instructions for removing and replacing cold-replaceable
subassemblies.
Chapter 8 gives the illustrated parts breakdown for the Netra CT 820 server.
Appendix A lists the connector pinouts for the cards in the Netra CT 820 server.
Appendix B provides instructions for connecting a terminal console to the server.
Appendix C gives the system specifications for the Netra CT 820 server.
Using UNIX Commands
This document might not contain information on basic UNIX
®
commands and
procedures such as shutting down the system, booting the system, and configuring
devices. Refer to the following for this information:
■
Software documentation that you received with your system
■
Solaris™ Operating System documentation, which is at
http://docs.sun.com