Sun Microsystems Fire V210, Administration Manual

Page: 32 / 114

1-14 Sun Fire V210 and V240 Servers Administration Guide • December 2005
For additional information about OpenBoot PROM configuration parameters see:
http://docs.sun.com
Search for OpenBoot 4.x, then select Forth Word Reference.
nvramrc none
Command script to execute if
use-
nvramrc?
is
true.
security-mode none
Firmware security level (options:
none
,
command
, or
full
).
security-password none
Firmware security password if
security-
mode
is not
none
(never displayed) - do not
set this directly.
security-#badlogins none
Number of incorrect security password
attempts
diag-script none
OpenBoot Diagnostics test suite is executed
automatically after power on if diag-switch
is true and POST passes.
diag-level max
Defines how diagnostic tests are run
(options are
off
,
min
,
menu
, and
max
).
diag-switch? false
If
true
:
• Run in diagnostic mode.
• After a
boot
request, boot
diag-file
from
diag-device.
If
false
:
• Run in non diagnostic mode.
• Following a
boot
request, boot
-file
from
boot-device.
diag-trigger none
parameter
error-reset-
recovery
boot
Command to execute following a system
reset generated by an error.
pcia-probe-list
Identifies number and order in which PCI
slots are probed.
TABLE 1-6
OpenBoot PROM Configuration Parameters Stored on the System
Configuration Card
Parameter Default Description