background image

1-4

    Sun Fire V210 and V240 Servers Administration Guide

 

• December 

2005

serial port and one serial management port, and two independent USB hubs. I/O 
expansion is provided via one PCI card slot supporting both 33 MHz and 66 MHz 
cards, and two PCI card slots supporting 33 MHz cards. 

1.1.3

Features

The Sun Fire V210 and V240 servers share the following features:

One or two UltraSPARC IIIi processors

Four DIMM slots per processor

Four 10/100/1000BASE-T Ethernet ports

One Ultra160 SCSI port for connecting external devices

One general purpose serial port

One serial management port

Two USB ports

One 10BASE-T Ethernet server management port

PCI expansion

DVD-ROM drive

Hot-swappable hard drives

System configuration card

Front and rear service indicators

1.1.4

Preinstalled Software

The Solaris 10 OS is preinstalled on the Sun Fire V210 and V240 servers HDI. 

To identify which specific version of software is installed on your server, use the  

cat /etc/release

 command.

When you power on your server for the first time you might be given the option to 
choose the version of Solaris OS you want installed. If this occurs, when you choose 
one version, the other one is deleted.

Summary of Contents for Fire V210



















































































































Reviews: