Sun Microsystems Fire V210, Administration Manual

Page: 92 / 114

6-16 Sun Fire V210 and V240 Servers Administration Guide • December 2005
6.6.4 To Run OpenBoot Commands
Caution – If you used the
halt
command or the Stop-A key sequence to reach the
ok
prompt, then issuing the
probe-scsi
command can hang the system.
1. Halt the system to reach the
ok
prompt.
How you do this depends on the system’s condition. If possible, you should warn
users before you shut the system down.
2. Type the appropriate command at the console prompt.
/pci@1e,600000/isa@7/i2c@0,320/motherboard-fru-prom@0,a2
/pci@1e,600000/isa@7/i2c@0,320/12c-bridge@0,18
/pci@1e,600000/isa@7/i2c@0,320/12c-bridge@0,16
/pci@1f,700000/network@2,1
/pci@1f,700000/network@2
/openprom/client-services
/packages/obdiag-menu
/packages/obdiag-lib
/packages/SUNW,asr
/packages/SUNW,fru-device
/packages/SUNW,12c-ram-device
/packages/obp-tftp
/packages/kbd-translator
/packages/dropins
/packages/terminal-emulator
/packages/disk-label
/packages/deblocker
/packages/SUNW,bultin-drivers
{1} ok
CODE EXAMPLE 6-4
show-devs
Command Output (Continued)