12’ LEG BRACES (continued)
8.
Walk around to the opposite side of the Tripod.
Attach one more Upper Cross Brace
(in green)
to the
OUTSIDE
of the Bracket and one more Cross Brace
(in blue)
to the
INSIDE
of the Bracket.
See figure 52.
Figure 53
shows the correct placement of braces. Each
Upper Cross Brace should alternate - with the
Green
Braces always bolting to the outside of the bracket and
the
Blue
Braces always bolting to the inside.
9.
Use
1 1/2” bolts and lock nuts
at each connection
point.
52
54
10.
Rotate the tripod so that you can bolt up the last
two Upper Cross Braces. These Braces attach the same
way.
See figure 54.
The Upper Cross Brace
(in green)
attaches to the outside of the Bracket while the Cross
Brace
(in blue)
attaches to the inside of the Bracket.
Use
1 1/2” bolts and lock nuts
at each connection
point.
11.
The finished Leg Brace setup should look like
figure 55.
Note that the
green
Upper Cross Braces are
on the outside and the
blue
Upper Cross Braces are on
the inside.
55
53
BRACKET
(PN 82073.1300)
INSIDE
OUTSIDE
PG 14
NOTICE
The tripod can be used as a 12’ model by not
installing the Lower Legs and Lower Leg Braces.
Before doing this YOU MUST read and folllow the
Setup instructions on
Page 18
. The ground stakes
supplied MUST BE USED.
