12’ LEG BRACES (continued)
4.
The six Upper Cross Braces will attach next. Start by
positioning one Cross Brace as shown in
figure 46.
This
Brace will bolt to the
OUTSIDE
of the two Brackets, as
shown in
figure 47 and figure 48.
5.
Use one
1 1/2” bolt and lock nut
at each Bracket to
secure the Brace. Run these bolts from the inside out so
that the nut is on the outside of the tube.
UPPER
CROSS
BRACE
(PN 82073.1400)
46
1 1/2” BOLT, LOCK NUT -
WRENCH TIGHTEN
47
48
6.
Position one Upper Cross Brace
(in blue)
as shown in
figure 49.
This Brace will bolt to the
INSIDE
of the two
Brackets, as shown in
figure 50 and figure 51
and it will sit
on the
INSIDE
of the Brace installed in
Steps 4 - 5
(shown in
green)
7.
Use one
1 1/2” bolt and lock nut
at each Bracket to
secure the Brace. Run these bolts from the inside out so
that the nut is on the outside of the Bracket.
1 1/2” BOLT, LOCK NUT -
WRENCH TIGHTEN
50
51
UPPER
CROSS
BRACE
(PN 82073.1400)
49
PG 13
