PLATFORM (continued)
3.
Attach the last Platform Section next. Slip it over the two exposed
bolts and secure using
lock nuts
as shown in
figure 23
. Leave these
hand tight for now.
4.
Position one of the Platform Stand-Offs as shown in
figure 24
.
Slide the stand off between the platform sections.
5.
Secure using one
3 3/4” bolt and lock nut
. Leave hand tight for
now.
6.
Repeat for the other two center holes using
3 3/4” bolts and lock
nuts
.
See figure 25.
PG 9
23
LOCK NUTS
PLATFORM
SECTION
(PN 82073.400)
PLATFORM
STAND-OFF
(PN 82073.500)
3 3/4” BOLT, LOCK NUT,
HAND TIGHT
24
25
3 3/4” BOLTS, LOCK NUTS,
HAND TIGHT
7.
Insert two more Platform Stand-Offs as shown in
figure 26
. These
two stand-offs go on the back side of the Platform - furthest away
from the Upper Leg that has a hand hold.
8.
Secure these stand-offs with two
3 3/4” bolts and lock nuts
.
9.
Attach the Upper Ladder Assembly next. Slide the Ladder
Assembly between the front two platform sections as shown in
figure 27
.
10.
Secure at the upper location only using one
3 3/4” bolt and lock
nut
as shown in
figure 28
.
11.
GO BACK AND WRENCH TIGHTEN ALL BOLTS FROM
STEPS 1 - 10. DOUBLE CHECK BOLTS TO ENSURE THEY
ARE PROPERLY FASTENED!
UPPER LEG
WITH HAND
HOLD
3 3/4” BOLTS, LOCK NUTS,
HAND TIGHT
26
28
3 3/4” BOLT, LOCK NUT
27
UPPER LADDER
ASSEMBLY
(PN 82073.200)
