SummaSign Pro SL T-series Cutters
User’s Manual
General Information
1-13
mode for manual operation, and menu mode. Each control panel
function is explained in Section 2.1.
5.
Display :
- The 2x16 character display informs the user of the current status
of the cutting process or actions that need to be taken.
6.
Sensors:
- The sensors detect the absence of media to prevent the knife
from damaging the cutting strip. When the cutter is turned on, the sensors
cause the media to move all the way to the front edge of the platen.
7.
Pinch rollers
:
- The pinch rollers (one at each side) exert downward force
through the media and onto the media sleeves. This squeezing between
the pinch rollers and media sleeves is what allows the cutter to accurately
advance and retract the media.
The T1010 Pro SL and T1400 Pro SL cutters are provided with an extra low
pressure roller in the middle to keep the vinyl media flat. The T1600 Pro SL is
equipped with two low pressure rollers.
8.
Cutting strip
: - This reddish-brown strip prevents damage to the knife tip
when the cutter is running and no media has been loaded. Because
cutting is done on the cutting strip, it is essential that it remain intact.
9.
Manual slitting knife
*:
- When the cutter is done cutting a graphic, move
the media forward by pressing the key. Use the manual slitting knife to
cut the finished graphic free from the media roll. Leave the loaded media
in place, ready for the next cut job.
* not installed on the T750 Pro SL model
10.
Stand: -
A stand comes standard with the T1010 Pro SL, T1400 Pro SL, and
T1600 Pro SL cutters. A stand is optional on the T750 Pro SL model.
