SummaSign Pro SL T-series, User Manual

Page: 46 / 81

SummaSign Pro SL D-series Cutters User’s Manual
Operation 2-4
800mm/s 120g K
ONLINE 1
... .
.45mm.. .
Menu
.. . . USER CONFIG 1
.. . INTERNAL TESTS
Menu
Menu
FIGURE 2-2:
SUMMASIGN PRO SL T-SERIES CONFIGURATION SUBMENUS
To select a menu by scrolling through the different options, press the jogging
key.
To exit from the menus and resume the previous on line operation, press the
key (ON LINE).
Under normal conditions, the cutter is on line; it may then be selected by the
host computer for a cutting or plotting operation or deselected by the host
computer. Pressing the
, or key will make the cutter go off line, in order
to initiate another operation.
The contents of the different menus are summarised in Table 2-1.
MENU DESCRIPTION
USER CONFIG 1 (->4)
Selects a given active cutter configuration from one
of the four sets of configuration parameters stored in
the cutter's memory
INTERNAL TEST
Activates one of the resident cutting plots provided
for informational purposes.
TABLE 2-1:
CONTENTS OF THE SUMMASIGN PRO SL T-SERIES MENUS