5-2
5. Heater program
｜Heater program list
5. Heater program
The applicable fiber protection sleeves vary depending on the cleave length. Below
are examples of protection sleeves.
Category Heater
program
Details
Slim 60mm
60mm 0.25 ECO
Can be used for heat shrinking 60mm protection sleeves for single
fiber with 0.25mm coating, for example, Sumitomo FPS-61-2.6.
ECO mode is enabled and helps increase heat cycles per battery.
S60mm0.25+5s
The program which heating duration is 5 sec. longer than “S60mm 0.25”.
S60mm0.25-5s
The program which heating duration is 5 sec. shorter than “S60mm 0.25”.
Slim 40mm
S40mm 0.25
Can be used for heat shrinking 40mm semi-shrunk protection
sleeves for single fiber, for example, Sumitomo FPS-40-2.6.
S40mm 0.25
Quick
Can be used for heat shrinking 40mm semi-shrunk protection
sleeves for single fiber, for example, Sumitomo FPS-40-2.6. Select
the program if you would like to reduce the heating cycle time. On
the program, the heater is automatically heated up to the pre-
heating temperature when the fusion splicing process is finished.
S40mm0.25+5s
The program which heating duration is 5 sec. longer than “S40mm 0.25”.
S40mm0.25-5s
The program which heating duration is 5 sec. shorter than “S40mm 0.25”.
Drop
Drop 1C
Can be used for heat shrinking 60mm protection sleeves for drop
cable splice, for example, Sumitomo FPS-D60.
Splice-On
Connector
LYNX
Can be used for heat shrinking protection sleeves for 10mm cleaved
Sumitomo’s splice-on-connector “Lynx-CustomFit”.
LYNX MPO
Can be used for heat shrinking protection sleeves for 10mm cleaved
Sumitomo’s splice-on-connector “Lynx MPO-CustomFit”.
LYNX MINI
Can be used for heat shrinking protection sleeves for 5mm cleaved
Sumitomo’s splice-on-connector “Lynx-CustomFit”.
E-SC Fusion
Can be used for heat shrinking dedicated protection sleeves for
Sumitomo “E-SC Fusion Connector”.
SPS
45mm Thin
Can be used for heat shrinking 45mm semi-shrunk protection
sleeves for single fiber, for example, SPS-45.
25mm 0.4
Can be used for heat shrinking 25mm protection sleeves of Nano
Sleeves N4 series, for example, Sumitomo FPS-N4-25.
25mm 0.9
Can be used for heat shrinking 25mm protection sleeves of Nano
Sleeves N9 series, for example, Sumitomo FPS-N9-25.
20mm 0.4
Can be used for heat shrinking 20mm protection sleeves of Nano
Sleeves N4 series, for example, Sumitomo FPS-N4-20.
20mm 0.9
Can be used for heat shrinking 20mm protection sleeves of Nano
Sleeves N9 series, for example, Sumitomo FPS-N9-20.
40mm 0.4
Can be used for heat shrinking 40mm protection sleeves of Nano
Sleeves N9 series, for example, Sumitomo FPS-N4-40.
■
Protection sleeves
Protection
Sleeve
Sleeve Length
[mm]
Diameter After
shrink [mm]
Coating Diameter
[mm]
Recommended
Cleave length
[mm]
FPS-1
60.5
Approx.3.2
0.25 to 0.9
16
FPS-40
40.5
Approx.3.2
0.25 to 0.9
10
FPS-5 40.0
Approx.
4.0mm×3.8mm
Single fiber 0.25 to 0.9
Ribbon fiber 0.2 to 0.4 (thickness)
10
FPS-6 40.0
Approx.
4.5mm×4.1mm
Single fiber 0.25 to 0.9
Ribbon fiber 0.2 to 0.4 (thickness)
10
FPS-61-2.6
61.5
Approx.2.6
0.25 to 0.9
16
FPS-D60 60.5
Approx.4.5×4.7
Drop/Indoor cable
2.0×3.1(or 2.6) /1.6×2.0
10