2
IMPORTANT SAFTY PRECAUTIONS
3. Do not use and store the splicer out of the locations defined in a brochure and
this manual. Doing so can cause splicer malfunction or deterioration, resulting
in fire or electric shock.
4. To reduce the risk of fire, electric shock or malfunction, do not allow the splicer
to be exposed to rain and get liquid such as water or a metallic object inside the
splicer. Doing so can cause fire, electric shock or malfunction by shorting out
internal components.
5. Never use the battery pack, AC adapter and battery charger, and power cables
for the machines other than the specified splicer. Doing so can cause these
items to damage, resulting in fire or heat generation.
6. Do not make mechanical or electrical modifications to the splicer since this may
expose you to dangerous voltage or other hazards.
7. Do not touch the electrodes during and after arc discharge. Doing so can cause
personal injury or electric shock.
8. The heating plate of the heat shrink oven may be hot during heating. Do not
touch the protection sleeve directly after heating. Doing so can cause burn. A
protection sleeve may also be hot after heating. Handle with care.
9. Do not operate the splicer in the rain. Doing so can cause AC adapter or battery
pack to be short-circuited.
10. Do not expose the splicer to extremely high temperature and high humidity or
to direct sunlight for prolonged periods.
11. Do not continuously use the heat shrink oven for long hours, keeping it high
temperature. Doing so can cause heat shrink oven to malfunction.
The following case is the exception for repairing and replacing the product free
of charge:
The Heating duration is set to a long time (e.g. 180 sec.) and the Finish
temperature is set to a high temperature (e.g. 200 °C). The heat shrink oven is
used for long hours by continuing to press the Heat key shortly after the heat
cycle is completed.
12. Only use alcohol to clean the splicer. To prevent malfunction and damage, do
not use any other kind of chemicals.
13. Never use spray cleaners such as Freon or flammable gas on the splicer. Heat
by arc can cause gas component to produce a chemical reaction, which will
deteriorate a microscope lens, resulting in a loss of splicing capability.
14. Parts that compose the heat shrink ovens might become high temperatures.
When those parts are damaged, do not use it and contact our service center.
15. Because it is likely to injure by shards of glass when the monitor is damaged,
do not use it and contact our service center.
16. When parts that compose this product and the accessory (battery pack, AC
adapter, and power cord, etc.) are damaged, do not use it and contact our
service center.
17. If this product gets wet with dew or the like, do not turn it on.
18. Do not use this product near the electronic equipment that handles a highly
accurate control and the faint signal such as the heart pacer. The influence of
the miss-operation of electronic equipment might be given.
19. Alcohol is prohibited on air transportation. Empty alcohol dispenser before
transportation.
