Sumitomo TYPE-72M12, Manual To Operation

Page: 69 / 106

4-6
4.Splice program ｜ Splice program editable items
4. Splice program
❚
Splice program editable items 1/2
Editable items Details
Operator Administrator
View Edit View Edit
Name Allows to edit splice program name ✔ - ✔ ✔
Abbreviated name
Allows to edit heater program name
which is displayed on the main splice
screen.
✔ ✔ ✔ ✔
Note
Allows to add a note to the selected
splice program. (up to 21 characters)
✔ ✔ ✔ ✔
Template
Views an original Splice Program
which was copied.
✔ - ✔ -
Arc Time Sets the arc fusion time
✔ ✔ ✔ ✔
Prefuse Time Sets the time between start of arc
fusion and feeding of fibers.
✔ ✔ ✔ ✔
Prefuse Power Sets the power for pre arc fusion.
- - ✔ ✔
Gap Sets the gap between fiber end faces
before arc fusion.
✔ ✔ ✔ ✔
Overlap Sets the distance of feeding fiber.
✔ ✔ ✔ ✔
Fiber Pulling ON or OFF the action of pulling fiber
after overlapping fiber.
- - ✔ ✔
Fiber Pulling Start*
Sets the time of pulling fiber.
- - ✔ ✔
Fiber Pulling Length*
Sets the distance of pulling fiber.
- - ✔ ✔
Fiber Pulling Speed*
Sets the speed of pulling fiber.
- - ✔ ✔
Cleaning Arc Time Sets the time for cleaning arc to
remove dust on optical fiber.
✔ - ✔ ✔
Cleave Angle Limit Sets the threshold of cleave angle. If
a reading exceeds the threshold, the
splicer will give an error.
✔ - ✔ ✔
Cleave Angle Warning Limit
Sets the Warning value of cleave
angle.
✔ - ✔ ✔
Additional Arc Time Sets the time for additional arc to
apply after splicing.
✔ ✔ ✔ ✔
Additional Arc Power
Sets the output power of additional
arc.
✔ ✔ ✔ ✔
Proof Test Enables or disables the proof test to
be performed after splicing. If
disabled, the proof test is not
performed by pressing the SET icon or
key and opening the hood.
- -
✔ ✔
Bubble check Enables or disables the function of
bubble check for spliced fiber.
✔
-
✔ ✔
Irregular Err. Limit
Sets the threshold of irregularity of
left and right fiber end positions.
✔
-
✔ ✔
Gap Err. Limit
Sets the threshold of the difference
between the largest and smallest gaps
of optical fiber end faces.
✔
-
✔ ✔
*Appears when Fiber Pulling is set to ON.