2-13
2.Basic splicing operation
｜
Optical fiber splicing
2. Basic splicing operation
7: Clean the bare fiber from the end of the fiber coating with a lint-free
gauze pad moistened with pure (more than 99%) alcohol. Pull the bare
fiber in the direction indicated by the arrow through the gauze pad. Do
not reuse the gauze pad that was used.
Keep the fiber squeaky clean.
Fiber protection sleeve
6: The fiber coating is removed. Take out the fiber holder from the JR-6+.
8: Lightly brush the ends with your finger
to fan out all fibers in a straight line.
5: Ensure that the HEATER LED is lit in
green and hold the JR-6+, especially
the “PUSH” portion of the main body lid
firmly. Then slide the holder receptacle
and holder lid slowly in the direction
indicated by the arrow.
