1-1
1. Introduction
｜
Product overview
1
．
Introduction
❚
Product overview
The TYPE-72M12 automatically
pre-inspects and aligns a pair of
optical fibers with equipped
microscopes, and then fuses them
together with heat from an electric
arc to form a low-loss splice. A
protection sleeve is applied over the
bare glass and cured in the built-in
heat shrink oven.
Read this manual carefully in its entirety to fully
understand machine capabilities. Save this manual in a
location in which you can easily get to see.
●
Optical fiber requirement
The TYPE-72M12 can splice the following optical fiber types.
Material Silica
glass
Profile types
SMF(G652),MMF(651),DSF(G653),NZDSF(G655),
BIF(G657)
Cable types
Drop cable(2.0mm x 3.1 or 2.6mm),
Indoor cable(2.0mm x 1.6mm)
Fiber count
1, 2, 4, 5, 6, 8, 10, 12
Fiber diameter
125
μ
m
Coating diameter
Single : 200
μ
m, 250
μ
m, 500
μ
m, 900
μ
m
Ribbon fiber thickness : 200
～
400
μ
m
Cleave length
10mm
