2-15
2.Basic splicing operation
｜
Optical fiber splicing
2. Basic splicing operation
4:
1. Do not re-clean the fiber after cleaving.
2. To avoid damaging or contaminating the delicate fiber ends,
insert each fiber immediately after preparation.
3. Glass-fiber fragments are extremely sharp. Handle with
care.
Caution
The fiber is cleaved.
4-1: Open the top clamp lever.
4-2: Lift the fiber holder.
4-3: Lift the off-cut and dispose
of it properly.
*Be careful not to touch the off-
cut against the fiber end face.
4-4: Place the fiber holder into
the TYPE-72M12.
4-5: Cleave the other fiber in the
same way.
Off-cut
