CheckPoint Pharma and CheckPoint
e
Operation and Maintenance Manual
SUEZ © 2018
70 of 112
DLM 97200-03 EN Rev. A
Maintenance Menu Options
Diagnostics
•
Pump:
Displays the current state of the pump and lets you set the pump state on and off;
also provides mechanism to drain water from the Sensor before shipping.
•
Lamp:
Displays the current state of the lamp and lets you set the lamp state on and off.
•
Conductivity Board/Analog Board:
Displays and continuously updates the value of the
current channel. The unit of measure displayed depends on the channel selected (µS/cm, °C,
or mV). Options are the following: IC conductivity, IC temperature, TC conductivity,
TC temperature, Cal resistor 1, Cal resistor 2, and Ground
•
Save Service Data:
Saves data and settings files to the USB flash memory drive.
•
4-20 mA:
Displays the current state of analog output 1, 2, or 3 and lets you output either
4 mA or 20 mA through the selected analog output.
•
Alarms:
D
isplays the current state of both alarms and lets you set the alarms’ state on and
off.
Performing any of the diagnostics functions requires that the Sensor be in Standby mode. If the
Sensor is performing analysis and a diagnostic option is selected, analysis will be stopped (a
confirmation screen will be displayed).
Consumables
The
Consumables
screen displays the current state of the lamp, the pump tubing, and (if it is
installed) the battery.
To install new consumables, press
F1,
and then select
F1
to install a new lamp or
F2
to install a new
pump. The
Horizontal Scroll
bar selects between the day, month and year fields; the
Vertical Scroll
bar changes the value in the selected field.
View Warnings and Errors
The
View Error
screen displays the Warnings and Errors history, with the most recent warnings and
errors at the top of the list. Use the
Vertical Scroll
bar to scroll through the list.
Press
F1
to display the
Remove Errors
screen. To remove the current warning or error, press
F1
and to remove all warnings and errors in the error history list, press
F2
.
A list of possible warnings and errors is shown
