Suburban REGAL INTENSIVE CARE UNIT 12019-01-NGFREP, Owner'S Manual

Page: 47 / 184

Form No. 702718 Rev. A March, 2005 35
Owner’s Manual - Regal Intensive Care Unit
Installing the
Fuel Cell
A fuel cell in the oxygen sensor powers the black calibration needle
in the oxygen concentration meter. The fuel cell comes packed in a
brown, cardboard box marked “Teledyne Oxygen Sensor”
(Figure 35).
CAUTION: Do not remove the fuel cell from the bag
until ready to use.
CAUTION: Wear safety glasses when handling the
fuel cell.
CAUTION: Avoid contact with the sensing surface.
CAUTION: The fuel cell contains lead, a chemical
known to cause cancer, birth defects, or other
reproductive harm.
CAUTION: Wash your hands thoroughly after
handling the fuel cell.
1. Open the brown box, then open the plastic bag inside and
take out the fuel cell (Figure 35).
2. Open the electronics compartment (refer to Page 57 ).
3. Open the filter/fans compartment (refer to Page 58 ).
4. Inside the filter/fans compartment, notice the installation of
the oxygen sensor (Figure 37).
Figure 35. Fuel Cell Box and Bagged
Fuel Cell
Figure 36. Oxygen Sensor Inside the
Electronics Compartment
Oxygen Sensor
Spiral
Cord