Suburban REGAL INTENSIVE CARE UNIT 12019-01-NGFREP, Owner'S Manual

Page: 42 / 184

30 SSCI - Suburban Surgical Company, Inc.
Chapter 2 - Description of Components
Intensive Care Unit,
Rear
(Figure 34)
The following section gives you detailed information on the compo-
nents on the rear of the Intensive Care Unit.
Figure 34. Intensive Care Unit, Rear
29 - Electric Power
Cord
This figure shows the electric power cord in its deployed position
ready to be plugged into its outlet. Also, refer to
Electric Power
Cord on Page 21.
CAUTION: The Regal Intensive Care Unit requires a
dedicated, 15-amp minimum source of electrical power.
This is the external portion of the electric power cord connection.
Inside the unit, wires from this connection lead to the system
ground, and to the main terminal block for distribution to the
various electric/electronic components in the unit. Also, refer to
Electric Power Cord Connection on Page 20.
From the pressure-regulated supply system, oxygen enters the
Intensive Care Unit through this port. From here, it is directed to
the oxygen flow meter for flow-rate regulation, then to the filter/fans
compartment, and then into the animal compartment.
25 - Electric Power
Cord Connection
26 - Oxygen Intake
Port
44 - Cooling Coil
27 - Ventilating Fan
26 - Oxygen Intake Port
(External)
25 - Electric Power Cord
Connection (External)
29 - Electric
Power Cord
(deployed)