Suburban REGAL INTENSIVE CARE UNIT 12019-01-NGFREP, Owner'S Manual

Page: 29 / 184

Form No. 702718 Rev. A March, 2005 17
Owner’s Manual - Regal Intensive Care Unit
On/Off Button
An amber light in the switch illuminates when the switch is On. To
heat the full compartment, turn both right and left switches On. Use the
temperature control knobs to regulate compartment floor temperature.
For more information, refer to
Heating the Compartment Floor on
Page 52.
System Light
When this red light is On, it indicates that the system
is operating. If the light is Off, it means that floor
heat is not operating, even though it may be turned
On. For example, the floor heat system might be On
but not actually providing heat if the system senses that
floor heat is currently at or above the temperature set
on the control knob.
Temperature Controller
Turning the knob on the temperature controller
raises or lowers the floor temperature in the animal
compartment. Turn the knob clockwise to increase
temperature, and counter-clockwise to decrease.
Digital Display
When the floor temperature system is On, this readout displays the
current floor temperature in degrees-Fahrenheit.
Fuse
This is a 3AG fast-acting, 250 V, 2 amp fuse. If you need replacement
fuses you can order them from SSCI, however, they are standard items,
and will be faster and cheaper to obtain at your local hardware store.
To replace or inspect a fuse, refer to
Replacing Floor Temperature
Fuses on Page 61.
Figure 18. Floor Temperature Contols
(Left Shown, Right Identical)
On/Off
Button
System
Light
Temperature
Controller
Digital
Display
Fuse