Suburban REGAL INTENSIVE CARE UNIT 12019-01-NGFREP, Owner'S Manual

Page: 27 / 184

Form No. 702718 Rev. A March, 2005 15
Owner’s Manual - Regal Intensive Care Unit
The oxygen on/off switch (Figures 11 and 14) controls the flow of
oxygen. An amber light in the switch illuminates when the switch is
On. With oxygen On, use the set-point adjustment knob to set the
desired oxygen concentration in the animal compartment. When the
red system light is On, it indicates that the system is operating. If the
light is Off, it means that oxygen is not flowing, even though the
system may be turned On. For example, the oxygen system might be
On but not actually providing oxygen if the system senses that the
oxygen concentration is currently at or above the level set on the
oxygen concentration meter. For more information, refer to
Using
Oxygen on Page 51.
WARNING: Before using oxygen, please read
Oxygen Warnings on Page 3.
The Intensive Care Unit includes an alarm system that warns you
with audible and visual signals when there is a problem with the
oxygen flow or concentration. The alarm system can be enabled or
disabled by using the alarm on/off switch (Figures 11 and 15). An
amber light in the switch illuminates when the switch is On. When
the red system light is comes On and the audible alarm sounds, the
Intensive Care Unit is in an alarm condition, and a problem exists in
the oxygen system. For the alarm system to work, both the main
and oxygen on/off switches must be On. For more information,
refer to
Using the Alarm System on Page 55.
13 - Oxygen On/Off
Rocker Switch &
System Light
14 - Alarm On/Off
Rocker Switch &
System Light
Figure 15. Alarm On/Off Switch and
System Light
On/Off
Switch
System
Light
Figure 14. Oxygen On/Off Switch and
System Light
On/Off
Switch System
Light