Subaru CROSSTREK HYBRID 2016, Owner'S Manual

Page: 400 / 546

.
The BSD/RCTA approach indicator
light may illuminate when driving close to
solid objects on the road or road side
(such as guardrails, tunnels and side-
walls).
.
The BSD/RCTA approach indicator
light may flash when turning at an inter-
section in urban areas or a multilane
intersection.
.
The BSD/RCTA approach indicator
light may flash and the warning buzzer
may sound if a building or a wall exists in
the reversing direction.
.
In the following cases, the system may
detect a vehicle driving two lanes away
from your vehicle.
–
When you are driving on the near
side of its lane from the corresponding
vehicle
–
When the vehicle driving two lanes
away is driving on the near side of its
lane from your vehicle
&
BSD/RCTA warning indicator
!
System temporary stop indicator
System temporary stop indicator
This indicator illuminates when the system
is used under the following conditions.
.
Extremely high or low temperatures
.
When abnormal voltage exists for the
12 V auxiliary battery
.
When the radar sensor is significantly
misaligned
Once the above conditions are corrected,
the system will recover from the temporary
stop condition and the indicator will turn
off. If the indicator remains illuminated for
a prolonged time, have the system in-
spected at a SUBARU dealer.
!
System temporary stop indicator
due to reduced radar sensitivity
System temporary stop indicator due to
reduced radar sensitivity
This indicator illuminates when the detect-
ability of the radar sensors is reduced.
Once the condition is corrected, the
system will recover from the temporary
stop condition and the indicator will turn
off. If the indicator remains illuminated for
a prolonged time, have the system in-
spected at a SUBARU dealer.
Starting and operating/BSD/RCTA
–
CONTINUED
–
7-43