Subaru CROSSTREK HYBRID 2016, Owner'S Manual

Page: 239 / 546

Climate control/Manual climate control operation
properly and become damaged, the sys-
tem may not be able to control the interior
temperature correctly. To avoid damaging
the sensors, observe the following pre-
cautions.
–
Do not subject the sensors to impact.
–
Keep water away from the sensors.
–
Do not cover the sensors.
The sensors are located as follows.
–
Solar sensor: beside the windshield
defroster grille
–
Interior air temperature sensor: next to
the steering column
–
Outside temperature sensor: near the
front bumper opening
Manual climate control op-
eration
&
Airflow mode selection
To select the airflow mode:
Type A:
Turn the airflow mode selection
dial.
Type B: Press the airflow mode selection
button.
To select the defrost mode:
Press the defroster button.
Airflow modes are as follows.
(Ventilation): Instrument panel outlets
(Bi-level): Instrument panel outlets and
foot outlets
(Heat): Foot outlets, both side outlets of
the instrument panel and some through
windshield defroster outlets (A small
amount of air flows to the windshield and
4-6