Subaru CROSSTREK HYBRID 2016, Owner'S Manual

Page: 394 / 546

than 4.4 km/h, the set speed can be
lowered 1 km/h each time by pressing the
“
RES/SET
”
switch to the
“
SET
”
side
quickly.
!
To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the
“
RES/SET
”
switch to the
“
SET
”
side once. Now the
desired speed is set and the vehicle will
keep running at that speed without de-
pressing the accelerator pedal.
&
Cruise control indicator light
Refer to
“
Cruise control indicator light
”
F
3-28.
&
Cruise control set indicator
light
Refer to
“
Cruise control set indicator light
”
F
3-28.
BSD/RCTA (if equipped)
The BSD/RCTA consists of rear radar with
Blind Spot Detection and Rear Cross
Traffic Alert.
These functions enable the system to
detect objects or vehicles to the rear,
drawing attention to the driver when
changing a lane or when driving in
reverse.
WARNING
The driver is responsible for driving
safely. Always be sure to check the
surroundings with your eyes when
changing lanes or reversing the
vehicle.
The system is designed to assist the
driver by monitoring the rear and
side areas of the vehicle during a
lane change or reversing. However,
you cannot rely on this system
alone in assuring the safety during
a lane change or reversing. Over-
confidence in this system could
result in an accident and lead to
serious injury or death. Since the
system operation has various limita-
tions, the flashing or illumination of
the BSD/RCTA approach indicator
Starting and operating/BSD/RCTA
–
CONTINUED
–
7-37