Subaru CROSSTREK HYBRID 2016, Owner'S Manual

Page: 54 / 546

7. Place the lap belt as low as possible
on your hips, not on your waist.
!
Unfastening the seatbelt
1. Push the release button of the center
seatbelt buckle (on the left-hand side) to
unfasten the seatbelt.
NOTE
When the seatback is folded down for
greater cargo area, it is necessary to
disconnect the connector.
2. Insert a tongue plate or other hard
pointed object into the slot in the con-
nector (buckle) on the right-hand side and
push it in. The connector (tongue) plate
will then disconnect from the buckle.
3. Allow the retractor to roll up the belt.
You should hold the webbing end and
guide it back into the retractor while it is
rolling up. Insert the connector (tongue)
into the belt holder.
Seat, seatbelt and SRS airbags/Seatbelts
–
CONTINUED
–
1-19