Sub-Zero ICBB-36R Design Manual Download Page 59 | Manualshive

Page: 59 / 69

background image

Wine Storage

59

subzero.com/specs

The height of the door panel for models ICB427G and
ICB427RG can extend beyond the typical panel height,
provided you do not exceed the panel weight limit. Refer
to specifications on page 46 of the integrated section.

The toe kick area on model ICB427G cannot be larger
than 152 mm, and on model ICB427RG, no larger than
229 mm. The toe kick area for either model cannot be less
than 102 mm.

If you are installing an optional lock kit on models
ICB427G or ICB427RG, you may have to order door
panels that exceed the 2032 mm finished height. Consult
the lock kit installation instructions and see if your panels
will allow for an adequate installation. These instructions
are available on our website, subzero.com.

Panel Requirements

MIN WIDTH

Stiles

57 mm

Top Rail

95 mm

Bottom Rail (ICB427G)

203 mm

Bottom Rail (ICB427RG)

76 mm

MAX PANEL WEIGHT

Door Frame

9 kg

Drawer Panel (ICB427RG)

5 kg

MIN PANEL THICKNESS

All Panels

16 mm

Integrated Panels

ICB427G

W

H

Door

679 mm

1927 mm

ICB427RG

W

H

Door

679 mm

1153 mm

Top Drawer

679 mm

345 mm

Bottom Drawer

679 mm

424 mm

Integrated Panels

MODELS ICB427G AND ICB427RG

The integrated full panels or frame panels for glass doors
for these models will follow some of the identical planning
processes used with the integrated line. The installation of
the door panels is completely different, however. Rather
than using the mounting hardware we used with the inte-
grated line, door panels for both models ICB427G and
ICB427RG will be applied with screws applied through our
door.

The drawer panels for the model ICB427RG will be applied
using the integrated technique of mounting brackets.

IMPORTANT NOTE:

The depth of models ICB427G and

ICB427RG is 610 mm from the front of the unit to its back.
You must allow for the thickness of the panel you are
applying when planning for the finished rough opening
depth if you want the front panel to be flush with sur-
rounding cabinetry. You may have to move the unit back
into the drywall or bring the cabinets forward. Refer to the
integrated section.

Panel dimensions listed in the chart assume the models
finish off at 2032 mm in height overall and have a 102 mm
toe kick for the model ICB427G. If you finish off at 2134
mm, for instance, you must add an additional 102 mm to
the finished height of the panel and 102 mm to the top rail.
Likewise, if you allow for a 152 mm toe kick for the model
ICB427G, you must subtract 51 mm from the bottom rail.

«
...
57
58
59
60
61
...
»

Summary of Contents for ICBB-36R






































































Reviews:

No comments

Related manuals for ICBB-36R

Brand: Gaggenau Pages: 82

Brand: Jenn-Air Pages: 36

Brand: Jenn-Air Pages: 40

Brand: Jenn-Air Pages: 53

Brand: Jenn-Air Pages: 60

Brand: Laurus Pages: 144

Brand: Gram Pages: 67

Brand: DeDietrich Pages: 108

Brand: Oypla Pages: 7

CombiCooler V6000 Supreme

Brand: V-ZUG Pages: 22

Brand: Gram Pages: 84

Brand: Saba Pages: 5

Brand: Amica Pages: 88

Brand: Häfele Pages: 24

795.75043 Series

Brand: Sears Pages: 48

Brand: SNAIGE Pages: 13

Brand: Ugur Pages: 45

Brand: Smoko Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands