Sub-Zero ICBB-36R Design Manual Download Page 3

Page: 3 / 69

Built-In Refrigeration

subzero.com/specs

Built-In Refrigeration.

For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, inside

and out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preserva-
tion makes the built-in line nothing short of revolutionary.

914 mm

2134

ICBBI-36R

914 mm

2134

762 mm

1219 mm

1067 mm

2134

914 mm

ICBBI-36F

ICBBI-36U

ICBBI-30U

ICBBI-36S

ICBBI-42S

ICBBI-42SD

ICBBI-48S

ICBBI-48SD

BUILT-IN MODELS

KEY FEATURES

•

Three distinct design approaches: overlay, flush inset
and stainless steel.

•

Handle options coordinate with handles of Wolf
cooking products.

•

Dual refrigeration; two compressors preserve food’s
goodness in two sealed compartments.

•

Energy efficient.

•

Advanced air purification system.

•

Crisper and deli drawers form a lower-temperature
zone for produce and meats.

•

Flip-up grille provides easy access for quick routine
maintenance.

•

All models are Star-K certified.

Summary of Contents for ICBB-36R






































































Search results

Summary of Contents for ICBB-36R

Reviews:

Related manuals for ICBB-36R

Brands by name

Popular brands

Sub-Zero ICBB-36R, Design Manual

Search results

Summary of Contents for ICBB-36R

Reviews:

Related manuals for ICBB-36R

Brands by name

Popular brands