Sub-Zero ICBB-36R Design Manual Download Page 10 | Manualshive

Page: 10 / 69

background image

The illustrations provide a cross section view of the three-
panel assembly, showing placement of the trim and a rear
view of the three-panel assembly with critical dimensions,
standard for all built-in models.

Overlay grille panels for the panel grille match the design
of the overlay door panels. Dimensions for the grille panel
are listed in the overlay panel specifications on the follow-
ing pages.

IMPORTANT NOTE:

When installing two units in a side-by-

side application, refer to pages 21–22 for dual standard
installations. Be aware that rough opening dimensions are
different for this application.

3 mm

OVERLAY PANEL

SPACER PANEL

BACKER PANEL

TRIM

8 mm

min

Panel assembly cross section. Panel assembly rear view.

6

mm

3

mm

OVERLAY

PANEL

SPACER

PANEL

BACKER

PANEL

19

mm

typical

Do not exceed overlay panel dimensions, as this could
cause damage to panels and the Sub-Zero unit.

Built-In Refrigeration

10

Overlay Panels

If you and your client have ordered an overlay model, you
will be adding panels and handles to give the unit a more
custom look. The overlay panel design option is available
for all built-in overlay models. For exact door panel dimen-
sions, refer to overlay panel specifications on the following
pages.

IMPORTANT NOTE:

Overlay models can be used in an

overlay or a flush inset application. Be aware that the
application specified will affect panel sizes, rough opening
dimensions and installation.

The overlay design allows decorative panels to cover the
door trim for a more seamless appearance that blends
with the design of the room. The most common way to
achieve this look is to work with three panels—the decora-
tive overlay panel, which is typically 19 mm, a 3 mm
spacer panel and a 6 mm backer panel. Depending on
your cabinet manufacturer, this could also be one panel
routed for different dimensions.

Regardless of the physical construction of the panels
(three-panel assembly or routed panel), you will need to
follow the overlay panel specifications on the following
pages for exact sizing and panel placement to ensure a
proper fit.

Overlay Panel Requirements

MAX WEIGHT PER PANEL

All Overlay Models

23 kg

Grille Panel

6 kg

MIN PANEL THICKNESS

All Overlay Panels

16 mm

«
...
8
9
10
11
12
...
»

Summary of Contents for ICBB-36R






































































Reviews:

No comments

Related manuals for ICBB-36R

Brand: EAS Electric Pages: 107

Brand: EAS Electric Pages: 120

Brand: V-ZUG Pages: 36

Brand: DeDietrich Pages: 108

Brand: U-Line Pages: 44

Brand: GVA Pages: 12

U-1224FZRINT-00A

Brand: U-Line Pages: 53

Brand: Zanussi Electrolux Pages: 20

Brand: NEFF Pages: 40

Brand: Danby Pages: 22

Brand: Danby Pages: 32

Brand: Gaggenau Pages: 102

Brand: Jocel Pages: 51

Brand: FAR Pages: 21

DDSF136D Series

Brand: Viking Pages: 62

Brand: Haier Pages: 13

Brand: Haier Pages: 12

Brand: Haier Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands