Sub-Zero ICBB-36R Design Manual Download Page 58 | Manualshive

Page: 58 / 69

background image

Overlay Panels

MODEL ICB424G

The overlay panel applied to model ICB424G should not
be confused with the built-in overlay panel application.
The overlay panel will consist of just a frame and would be
either the 16 mm or 19 mm thick panel you may be using.
It is affixed directly to the door itself with screws through a
series of predrilled holes in the door frame. A backer and
spacer panel is not required.

Model ICB424G can be installed flush with surrounding
cabinetry. Depending on the thickness of the overlay door
panel, it may be necessary to install the unit so that it
extends 6 mm beyond the front surface of surrounding
cabinetry. This will prevent interference between the door
panel and adjoining cabinetry at the maximum 145° door
swing. Refer to the full-scale template at the end of this
section.

Wine Storage

58

Door Panels

Unless you are installing a stainless steel model, you will
need to provide a frame for the glass door. If you order a
stainless steel unit, models ICB424G, ICB424FSG and
ICBWS-30 will be shipped with their panels and hardware
installed. For models ICB427G and ICB427RG, optional
stainless steel panels or custom panels will need to be
installed.

The glass door is designed to be exposed to room air cir-
culation. Decorative overlays on the glass should be kept
to a minimum. Also, rails and stiles can be increased in
size but should not exceed the cabinet manufacturers’
standard width and cannot exceed the overall door panel
dimensions listed in the charts.

The back sides of rails and stiles that will be visible
through the glass door will need to be finished. Also, the
inside edges of the frames must be finished to match the
front surface.

FREESTANDING MODEL ICB424FSG

Model ICB424FSG does not require any panels or sur-
rounding cabinetry. It has a beautiful stainless steel
exterior that is designed to be used in a freestanding
application.

Overlay Panels

PANEL DIMENSIONS

W

H

ICB424G

603 mm

764 mm

MIN WIDTH

Stiles and Rails

57 mm

MAX PANEL WEIGHT

Door Frame

5 kg

MIN PANEL THICKNESS

All Panels

16 mm

«
...
56
57
58
59
60
...
»

Summary of Contents for ICBB-36R






































































Reviews:

No comments

Related manuals for ICBB-36R

Brand: Gaggenau Pages: 103

Brand: JUNO Pages: 11

Brand: Waeco Pages: 112

Brand: Kelvinator Pages: 16

Brand: VOX electronics Pages: 100

Brand: Hanseatic Pages: 60

Brand: Matrix Pages: 24

Brand: Summit Professional Pages: 36

Brand: Veripart Pages: 120

U-1224FZRINT-00A

Brand: U-Line Pages: 53

Brand: Summit Pages: 16

CONTEMPORARY CLASSIC DAR110A2LDB

Brand: Danby Pages: 28

Brand: Indesit Pages: 9

Brand: U-Line Pages: 55

E23CS78HP - Icon 22.6 cu. Ft. Refrigerator

Brand: Electrolux Pages: 34

Brand: Beko Pages: 24

Brand: Beko Pages: 40

Brand: Beko Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands