Sub-Zero ICBB-36R Design Manual Download Page 37 | Manualshive

Page: 37 / 69

background image

PRO 48 Refrigeration

37

subzero.com/specs

Planning Information

PRO 48 models can be used freestanding or installed as a
standard or flush built-in application. For standard built-in
installations, the face frame of the unit will extend 51 mm
beyond cabinetry. In flush built-in installations, the front of
the face frame will be flush with surrounding cabinetry.

ELECTRICAL REQUIREMENTS

International models from the factory designed without a
transformer require a 220-240 V AC, 50/60 Hz electrical
supply, fused at the correct rating for the unit. If required
by local or national codes, the power cord can be easily
replaced using the power inlet device.

For PRO 48 models, the electrical supply should be
located within the shaded area shown in the illustration
below. Follow local codes and ordinances when installing
the receptacle. A separate circuit, servicing only this appli-
ance, is required. A ground fault circuit interrupter (GFCI)
is not recommended and may cause interruption of opera-
tion.

Electrical Requirements

Power Supply

220-240 V AC, 50/60 Hz

Circuit Breaker

10 amp

Receptacle

3-prong grounding-type

PLUMBING REQUIREMENTS

PRO 48 models come with an automatic ice maker. The
water supply line should be located within the shaded area
shown in the illustration below. The water supply line
should be connected to the house supply with an easily
accessible shut-off valve between the supply and the unit.
Do not use self-piercing valves. A saddle valve kit
(4200880) is avail able through your authorized Sub-Zero
dealer. The water line must not interfere with installation of
the anti-tip brackets.

IMPORTANT NOTE:

A reverse osmosis system can be

used provided there is constant water pressure of 2.4 bar
to 8.3 bar supplied to the unit at all times.

Plumbing Requirements

Water Supply Line

6.35 mm OD copper line

Water Pressure

2.4–8.3 bar

Excess Water Line for Connection

914 mm

76 mm

FRONT VIEW

FLOOR

132

mm

152

mm

Location of water supply.

FRONT VIEW

1918 mm

FROM

FLOOR

178

mm

E

152

mm

Location of electrical supply.

«
...
35
36
37
38
39
...
»

Summary of Contents for ICBB-36R






































































Reviews:

No comments

Related manuals for ICBB-36R

Brand: Haier Pages: 23

Brand: Haier Pages: 88

Brand: Haier Pages: 7

Brand: Maytag Pages: 44

Brand: JUNO Pages: 44

GLR12B D16 Series

Brand: Galanz Pages: 26

Brand: WARREN-SHERER Pages: 17

Brand: Kairak Pages: 30

Brand: Indesit Pages: 56

Brand: Randell Pages: 2

Brand: Rangemaster Pages: 40

CollMatic HDC225

Brand: Waeco Pages: 388

Brand: Sunbeam Pages: 20

Brand: GOVI Pages: 48

Brand: KBS Pages: 33

Brand: Amica Pages: 60

Brand: Stirling Pages: 24

Brand: Gibson Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands