Page 95
Component Access/Removal
Integrated (
Integrated (
700-
700-
2) Series
2) Series
7-28
#
3756780
- Revision D - July, 2005
Mullion Divider Assembly Removal (700BR-2 Only)
The mullion divider in the 700BR-2 sets on top of two
divider supports at the back and the mullion between
the two drawer areas at the front. A gasket around the
top edge of the divider keeps the divider in place by
pressing tight to the front, back and sides of the com-
partment.
To remove the mullion divider, reach into the lower com-
partment and push the divider upwards.
Mullion Divider Supports Removal (700BR-2 Only)
The two mullion divider supports in the 700BR-2 are
attached to each side wall at the back of the compart-
ment with two screws each.
To remove the two divider supports, the drawers and
the mullion divider assembly will need to be removed
first. Then, extract the screws from the supports and
pull the supports towards the front of the unit. (Not
shown)
Drawer Closer Assembly Removal (All Base Units)
The drawer closer assemblies are located on the right
side wall, towards the back of the compartment. Two
screws secure each drawer closer to the wall.
To access and remove a drawer closer assembly, first
remove the appropriate drawer. Then, extract the two
screws that secure the drawer closer to the wall and
pull the drawer closer assembly from the wall.
Drawer Slide Assembly Removal (All Base Units)
There are four drawer slide assemblies in 700-2 Series
units, two on each side wall. The drawer slide assem-
blies are attached to the side walls with Allen-head
screws passing through the drawer slide bracket into
blind threaded inserts.
To remove a drawer slide assembly, first remove the
drawer. Then, extract the drawer slide mounting screws
with a 5/32" Allen-head wrench, and pull the drawer
slide assembly away from the wall.
NOTE:
The pins at the end of the drawer slides are
replaceable. Screw the pins counterclockwise to
remove them.
(See Figure 7-20 earlier in this section)
Figure 7-70. Mullion Divider Removal, BR-2
Push divider
upwards
Figure 7-71. Drawer Closer Assembly Removal
Figure 7-72. Drawer Slide Assembly Removal
Drawer Slide Assy
Drawer Closer Assy
Mullion Divider
