Studer Vista 9, Operating Instructions Manual

Page: 63 / 574

Desk Operation 2-2
2.4.6 Area 6 – studio Monitoring
A – B
Selects the Studio A or B for which the controls are currently active.
SEL – FOLW CR – PFL / SOLO
Determines whether the studio is fed with:
• what is selected on the
SOURCE SELECTOR
(32 keys),
• the same source as the control room, or
• the PFL/SOLO signal only.

A: RED LIGHT – B: RED LIGHT
Indicates active red light. Can also be pressed in order to
switch the red light on/off manually, if not already activated
by e.g. open faders.

A: SIG 1 – B: SIG 1 – A: SIG 2 – B: SIG 2
Two GPIOs (general-purpose I/O – with optocoupler inputs
and either open-collector or relay outputs) are assigned to
these keys for signaling purposes (refer to the talkback and
signaling block diagram in
chapter 2.4.7 ).

A: TALK – B: TALK
Shortcut keys for talkback to the two studios.

RE-INJECT
If the studio is muted by an active
RED LIGHT
, this key allows to inject the
signal anyway.
Please note that, depending on the installation and the current level, this
might result in acoustical feedback.

MUTE –

DIM
Keys for muting or dimming the studio speakers.
DIM
level may be adjusted
in the monitoring.ini file by experts only.
LEVEL
Level control for the studio speakers.
Vista 9 Digital Mixing System
Date printed: 27.0.0
SW V4.5