Studer Vista 9, Operating Instructions Manual, Page: 402 / 574

Vista 9 Digital Mixing System
5-08 Au
Date printed: 28.0.0 SW V4.5
same timecode location, an Event List is created at that location. The Event
List will contain all Events recorded at that location.
Only the timecode location of an Event may be edited. Events may copied to
new locations or be deleted from the new Mix Pass.
Impo­rtant No­te
Control values may not be changed using the Event List Editor.
Displayed Events Since a vast number of Events may be generated during a mix, Event Lists
become both very numerous and very large. In a large or complex project,
the number of events can grow to be overwhelming. To solve this problem,
the Events to be displayed may be selected in one of two ways:
• Show Menu Selections: The Event Editor will display only the items se-
lected in this menu
• Event List Filter: The Event Editor will display only the items selected by
the Event List Filter
Sho­w Menu Selecting an item from the ‘Show:’ pull-down menu will select the Events for
that item’s controls to be displayed in the Event List Editor.
The following sets of Events are available in the ‘Show:’ menu:
• Custom…: Allows a customized set of Events to be displayed. Selecting
this item will open the Event List Filter where an exact set of Events may
be chosen for display (see below). If a set of custom set of Events has al-
ready been selected, choosing ‘Custom…’ will display the Events within
that set.
• Mutes: Only Mute Events will be displayed in the Event List Editor
• Switches: Only Switch Events will be displayed in the Event List Editor
• Mutes & Switches: Only Mute and Switch Events will be displayed in the
Event List Editor
Event List Filter
Using the Event List Filter, Events for specific controls can be selected for
display in the Event column of the Event List Editor window.
To access the Event List Filter, click the icon.