Studer Vista 9, Operating Instructions Manual

Page: 385 / 574

Vista 9 Digital Mixing System
Au 5-9
Date printed: 28.0.0 SW V4.5
5.12.2 Snapshots/Presets
VMC Snapshots and Presets may be recalled while Au is in use.
The control values contained within Snapshots and Presets maybe applied
to the console while Au is in operation, but only for controls that
have been properly enabled. All Mix Pass ‘Write To:’ and ‘Extend Back To:’
conditions apply.
Snapshot and Preset control values may be recalled and stored as Static values
by recalling the desired Snapshot/Preset without engaging Write or Trim en-
able. The Static values will be updated and saved the next time a Mix Pass is
written.
Recall Behavio­r
The Snapshot page does not have dedicated automation controls. The current
global automation modes apply when Snapshots or Presets are recalled. Any
preselector may be used to select global modes, depending on the controls/
functions the user wishes to enable.
Switches and Selectors recalled using Snapshots or Presets will follow the
rules of a Press and Release switch operation. Refer to chapter 5.10.3.1 .
Since values are being applied to VMC controls, the affects of recalling Snap-
shots or Presets may auditioned.