Studer Vista 9, Operating Instructions Manual

Page: 187 / 574

Vista 9 Digital Mixing System
GC Operation 4-4
Date printed: 28.0.0 SW V4.5
Example 2
Goal The value of channel 3 should be reduced by 4 dB on ‘Snapshot #1’, ‘Snapshot
#3’, and ‘Snapshot #5’.
These snapshots currently contain the following fader values:
‘Snapshot #1’: 0 dB; ‘Snapshot #3’: –5 dB; ‘Snapshot #5’: –10 dB.
Therefore, after the update they should contain the new, updated values:
‘Snapshot #1’: –4 dB; ‘Snapshot #3’: –9 dB; ‘Snapshot #5’: –14 dB.
Procedure
Make sure the
Enable Trim mode
option in the ‘Option: Snapshot Auto-
mation’ menu is set.
Recall any snapshot.
Hold
ISO
on channel strip 3. Touch the fader twice in order to put it into Trim
mode.
Lower the fader of channel 3 by 4 dB (the exact trim value will be displayed
on the Vistonics
™
screen).
Select ‘Snapshot #1’ with the trackball.
Hold the
CTRL
key on the control bay, and select ‘Snapshot #3’ and ‘Snapshot
#5’.
Click on ‘Recall and Update’, and confirm that you want to overwrite these
snapshots.
The console will automatically recall and update the selected snapshots.
Since the console assumes that the controls being in Trim mode have been
placed into this mode for the purpose of this update, the operator will be asked
whether these controls should be taken out of Trim mode afterwards.