Studer Vista 9, Operating Instructions Manual

Page: 539 / 574

Vista 9 Digital Mixing System
RELINK 8-17
Date printed: 29.10.10 SW V4.5
8.5.7 Control Network
All systems that need to be part of the I/O Sharing network need to be inter-
connected via Ethernet. On the Vista side, it is always the desk that needs to
be networked.
VISTA 9
PC 1
LAN 1
IP: 192.168.1.128
IP: 192.168.3.128
SUBN: 255.255.255.0
LAN 2
IP: 192.168.2.128
IP: 192.168.4.128
SUBN: 255.255.255.0
Switch 1 Switch 2
PC 2
LAN 1
IP: 192.168.1.129
IP: 192.168.4.129
SUBN: 255.255.255.0
LAN 2
IP: 192.168.2.129
IP: 192.168.3.129
SUBN: 255.255.255.0
BRIDGE 1
IP Port 1
192.168.1.60
IP Port 2 192.168.2.60
SUBN: 255.255.255.0
BRIDGE 2
IP Port 1
192.168.1.60
IP Port 2 192.168.2.60
SUBN: 255.255.255.0
SCore Live
Virtual Vista
IP: 192.168.2.XXX
SUBN: 255.255.255.0
RELINK NETWORK - e.g. OnAir 2500
MAC:
IP:
SUBN:
CONTAINER:
HiQnet Device
IP: 192.168.2.XXX
SUBN: 255.255.255.0
DAW Control e.g. ProTools
IP: 192.168.2.XXX
SUBN: 255.255.255.0
STUDER Plugin Engine
IP: 192.168.2.200
SUBN: 255.255.255.0
• Vista desk networked (Ethernet)
• Tie lines between cores (MADI, AES, or HD Links)
• DNET technology from OnAir product range
• Setup with the OnAir configuration tool also on the Vista side.
8.5.7.1 Vista 9
Vista 9 is by default equipped with two Ethernet switches: ‘
Switch 1
’ and
‘
Switch 2
’. The sockets thereof can be found at the front of the desk.
The simplest way is to use
Switch 1
for I/O Sharing. In that case,
Switch
2
can still be wired directly to the bridge card of the SCoreLive.
In case of redundant bridge cards in the SCore Live, two ports from each
Ethernet switch are wired to both ports of the bridge cards in parallel. From
Switch 1
, the connections are made to all other I/O Sharing and/or control-
ling/controlled devices such as the Virtual Vista computer or a DAW.
In case the I/O Sharing network should only consist of two Vista 9 consoles,
also a standard network cable between the ‘Switch 1’ Ethernet switches of
the two consoles could be used.