Stryker Power-PRO XT, Maintenance Manual

Page: 55 / 186

A
B
C
D
F Fiig gu urre e 2 26 6 –– R Re elle ea asse e // S Sp prriin ng g h ha an nd dlle e a asssse em mb bllyy rre ep plla acce em me en ntt ((X XP PS S))
6. Reverse steps to reinstall.
7. Verify proper operation before you return the product to service.
S Sp prriin ng g h ha an nd dlle e a asssse em mb bllyy rre ep plla acce em me en ntt ((X XP PS S o op pttiio on n))
T To oo ollss rre eq qu uiirre ed d::
• 3/32'' hex wrench
• Small slotted screwdriver
P Prro occe ed du urre e::
1. Raise the product to the highest height position.
2. Raise the siderail to the up and locked position.
3. Using a 3/32" hex wrench, remove the four screws (A) that secure the release cover (B) to the overmold assembly to
remove the release cover (Figure 26).
4. Using a small slotted screwdriver, pry the release handle return spring (C) up to remove the spring (Figure 26).
5. Reverse steps to reinstall.
6. Verify proper operation before you return the product to service.
6506-109-002 Rev G.1 49 EN