Stryker Power-PRO XT, Maintenance Manual

Page: 14 / 186

IIn nttrro od du uccttiio on n
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating or
maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or maintenance
of this product.
C CA AU UT TIIO ON N
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this
manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable operation
resulting in injury to patient or operator. Modifying the product also voids its warranty.
N No otte e
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current product
information available at the time of printing. There may be minor discrepancies between your product and this manual. If
you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.
P Prro od du ucctt d de essccrriip pttiio on n
The Stryker Model 6506 P Po ow we err--P PR RO O™ XT cot is a powered ambulance cot that consists of a platform mounted on a
wheeled X-frame designed to support and transport a maximum weight of 700 lb (318 kg) in pre-hospital and hospital
environments.
The device is collapsible for use in emergency vehicles and has an adjustable load height feature to allow the device to be
set to different ambulance deck heights for proper body mechanics during loading and unloading. The NiCd battery-
powered hydraulic lift system allows operators to raise and lower the cot using the powered controls, while duplicate foot
end controls on the upper and lower lift bars accommodate different operator positions or sizes. The cot is equipped with a
manual back-up release handle to allow the operation of cot functions in the event of power loss. The device is equipped
with a retractable head section for 360-degree mobility in any height position, siderails, patient securement straps, an
adjustable pneumatic backrest, and various optional accessories that assist with the transport of a patient. Maximum
patient comfort is attainable with the three different litter positions of shock, flat leg, and optional knee Gatch positioning.
The S SM MR RT T™ power system consists of a S SM MR RT T charger and a S SM MR RT T Pak. The S SM MR RT T Pak powers the hydraulic lift
system of the Stryker powered ambulance cots.
IIn nd diicca attiio on nss ffo orr u usse e
The Stryker P Po ow we err--P PR RO O XT is a powered wheeled stretcher, which is intended to support and transport the entire body of
a traumatized, ambulatory, or non-ambulatory human patient (includes infants and adults).
The battery-powered hydraulic lift system is intended to help reduce the effort required by the operator to raise and lower
the cot. The device is designed to support patients in a supine (horizontal) or sitting position and facilitate the transportation
of associated medical equipment (such as oxygen bottles, monitors, or pumps) in emergency or transport vehicles. This
ambulance cot is intended to be used in pre-hospital and hospital environments, and in emergency and non-emergency
applications. It is rated to a maximum capacity of 700 lb (318 kg) (sum of the patient, mattress, and accessory weight) and
the intended operators of the device are trained professionals including emergency medical service and medical care
center personnel, as well as medical first responders.
P Po ow we err--P PR RO O XT is not intended for extended stay or use as a hospital bed or in devices that modify air pressure, such as
hyperbaric chambers.
EN 8 6506-109-002 Rev G.1