F
Fiixxe
ed
d e
en
nd
drra
aiill iin
nsstta
alllla
attiio
on
n
Always verify proper operation of all components before you return the product to service. Some products are equipped
with one or both fixed endrails. Products ship with all four rails down. Complete this procedure before you place the product
into service. See instructions provided in the fixed endrail positioning kit. The instructions are in a plastic envelope on the
mattress.
N
No
otte
e -- Products equipped with a fixed endrail are packaged with the endrail down to prevent damage during transportation.
Complete the procedure below to permanently mount the endrail in the upper position.
T
To
oo
ollss rre
eq
qu
uiirre
ed
d::
•
None
P
Prro
occe
ed
du
urre
e
1. Raise the endrail. Hold the endrail in the upper position.
2. Raise the barrel covers.
3. Insert the lock rods in the provided holes.
4. Insert the cotter pins to hold the lock rods in position.
5. Remove any white powder from the barrels and reinstall the barrel covers.
6. Verify the endrail is secure before you place the product into service.
S
Siid
de
erra
aiill//e
en
nd
drra
aiill vve
erriiffiicca
attiio
on
n ffo
orr a
ad
djju
usstta
ab
blle
e rra
aiillss o
on
nllyy
Inspect the following items:
Siderail/endrail handles, handle triggers, and rotational movement operate.
Siderails/endrails raise and lower and lock in the 9 in., 14 in., and upper positions when you raise or lower the rails.
Siderails/endrails automatically stop at the 9 in. position when lowered without interruption (handle kept rotated to the
left or right while lowering the rail) from upper positions. Rotate the handle to the left or right to lower the rail from the
9 in. position to its lowest position under the mattress surface.
N
No
otte
e -- The 9 in. double safety lock may not be present on some products.
A
Acccce
essss d
do
oo
orr vve
erriiffiicca
attiio
on
n ffo
orr m
mo
ovviin
ng
g a
acccce
essss d
do
oo
orrss o
on
nllyy
Inspect the following items:
Release knobs operate.
Access doors open, close, and lock.
Both release knobs open and close. Indicators are green when the door is closed and locked. Indicators are yellow
when the door is open. Verify that the access doors are closed and locked when both open and close indicators are
green.
S
Scca
alle
e ssyysstte
em
m cca
alliib
brra
attiio
on
n
N
No
otte
e -- A weight of known amount is required to calibrate the scale system. Use a 100 lb (45 kg) or two 50 lb (22.6 kg)
weights to complete this procedure. The weight(s) must be ± 0.5 lb (0.2 kg) at 50 lb (22 kg) or less or ± 1.0 lb (0.4 kg) at ≥
50 lb (22 kg) when flat to ensure scale system precision. If the weight(s) do not have the required tolerance, a controlled
weighing must be made to determine their weight is within the ± 0.5 lb (0.2 kg) at 50 lb (22 kg) or less or ± 1.0 lb (0.4 kg) at
≥ 50 lb (22 kg) when flat tolerance.
EN
6
1900-009-002 Rev AA.6
