Stryker CUB FL19H, Maintenance Manual

Page: 55 / 152

A Acccce essss d do oo orr u up pp pe err cco ovve err rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• Small regular screwdriver
• 5/32” Allen wrench
P Prro occe ed du urre e::
1. Remove the access door. See Access door replacement (page 52).
2. Remove the colored label affixed to the outside of the upper cover of the access door.
3. Using a #1 Phillips screwdriver, remove the four screws (M) that secure the top half of the upper cover (N) to the bottom
half of the upper cover (W) (Figure 32). Save the screws.
4. Insert a small regular screwdriver between the two halves of the upper cover. Separate the two halves. Use caution to
avoid scratching the covers or damaging the snap pins.
5. Using a #2 Phillips screwdriver, remove the eight screws (T) that secure the upper end of the posts to the upper
structural member (V) (Figure 32). Save the screws.
6. Using a 5/32” Allen wrench, remove the two Allen screws (U) that secure the hinge (G) and the last post to the upper
structural member (V) (Figure 32). Remove and discard the upper cover.
7. Reverse steps to reinstall.
8. Verify proper operation before you return the product to service.
A Acccce essss d do oo orr llo ow we err cco ovve err rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• Small regular screwdriver
• 5/32” Allen wrench
P Prro occe ed du urre e::
1. Remove the access door. See Access door replacement (page 52).
2. Remove the colored label affixed to the outside of the lower cover of the access door.
3. Using a #1 Phillips screwdriver, remove the four screws (O) that secure the bottom half of the lower cover (P) to the top
half of the lower cover (Y) (Figure 32). Save the screws.
4. Insert a small regular screwdriver between the two halves of the lower cover. Separate the two halves. Use caution to
avoid scratching the covers or damaging the snap pins. Remove and save the access door upper cover.
5. Using a #2 Phillips screwdriver, remove the eight screws (X) that secure the lower end of the posts to the lower
structural member (Z) (Figure 32). Save the screws.
6. Using a 5/32” Allen wrench, remove the two Allen screws (A) that secure the hinge (I) and the last post to the lower
structural member (Z) (Figure 32). Remove and discard the lower cover. Save the screws.
7. Reverse steps to reinstall.
8. Verify proper operation before you return the product to service.
1900-009-002 Rev AA.6 53 EN