W
Wa
arrn
niin
ng
g//C
Ca
au
uttiio
on
n//N
No
otte
e D
De
effiin
niittiio
on
n
The words W
WA
AR
RN
NIIN
NG
G, C
CA
AU
UT
TIIO
ON
N, and N
NO
OT
TE
E carry special meanings and should be carefully reviewed.
W
WA
AR
RN
NIIN
NG
G
Alerts the reader about a situation which, if not avoided, could result in death or serious injury. It may also describe
potential serious adverse reactions and safety hazards.
C
CA
AU
UT
TIIO
ON
N
Alerts the reader of a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the
user or patient or damage to the product or other property. This includes special care necessary for the safe and effective
use of the device and the care necessary to avoid damage to a device that may occur as a result of use or misuse.
N
No
otte
e -- Provides special information to make maintenance easier or important instructions clearer.
S
Su
um
mm
ma
arryy o
off ssa
affe
ettyy p
prre
ecca
au
uttiio
on
nss
Always read and strictly follow the warnings and cautions listed on this page. Service only by qualified personnel.
W
WA
AR
RN
NIIN
NG
G
•
Always replace the two bolts. The Scotch-Grip coating is less effective after you tighten or remove the bolts.
•
Always have only Stryker service technicians or service personnel trained by Stryker perform this procedure. Failure to
comply can result in serious damage to the bed and or or severe injury to users or patients.
•
Always use part number 19-0381 to replace the rail assist cable. Use of a different cable may cause injury to the patient
or user and damage to the product.
C
CA
AU
UT
TIIO
ON
N
•
Always use ESD protective equipment before you open antistatic bags and service electronic parts.
•
Do not place unprotected circuit boards on the floor.
•
Do not use hydraulic fluids other than the recommended M
Mo
ob
biill™ Aero HFA to avoid the risk of jack damage.
•
Do not overtighten the P.C. valve to avoid the risk of valve, O-ring seal, or jack base damage.
•
Always use 1.5 VDC alkaline batteries.
•
Always remove the batteries from the product during long periods of disuse.
•
Always make sure that the sawhorses can support at least 200 lb (91 kg).
•
Do not apply too much force to the bolts or they may break.
EN
4
1900-009-002 Rev AA.6
