Stryker CUB FL19H, Maintenance Manual, Page: 34 / 152

6. Reverse steps to reinstall.
7. Calibrate the scale system. See Scale system calibration (page 6).
8. Verify proper operation before you return the product to service.
B Ba atttte erryy rre ep plla acce em me en ntt,, sscca alle e o op pttiio on n
C CA AU UT TIIO ON N
• Always use 1.5 VDC alkaline batteries.
• Always remove the batteries from the product during long periods of disuse.
The icon will display when the scale batteries need to be replaced.
T To oo ollss rre eq qu uiirre ed d::
• #2 Phillips screwdriver
P Prro occe ed du urre e::
1. Use a #2 Phillips screwdriver to remove the two screws (A) that secure the battery cover (B) to the enclosure (Figure
19).
B
A
F Fiig gu urre e 1 19 9 –– B Ba atttte erryy rre ep plla acce em me en ntt
2. Discard the batteries.
3. Reverse steps to reinstall.
4. Calibrate the scale system. See
Scale system calibration
(page 6).
5. Verify proper operation before you return the product to service.
H He ea ad d sse eccttiio on n rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• (2) 1/2” combination wrench
P Prro occe ed du urre e::
1. Raise the head section to the highest position.
2. Lower the rails all the way down.
3. Apply the brakes.
EN 32 1900-009-002 Rev AA.6