Stryker CUB FL19H, Maintenance Manual

Page: 37 / 152

8. Reverse steps to reinstall
9. Verify proper operation before you return the product to service.
H He ea ad d sse eccttiio on n ssu up pp po orrtt a arrm m rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Long needle nose pliers
• Bungee cords (or equivalent)
P Prro occe ed du urre e::
1. Lower the rails all the way down.
2. Apply the brakes.
3. Raise the head section.
4. Using bungee cords, support the raised head section.
5. Using long needle nose pliers, remove the two inner cotter pins (A) that secure the support arm (B) in place (Figure 22).
Save the cotter pins.
6. Remove the support arm and the nylon shoulder bushings (C) (Figure 22). Inspect the nylon shoulder bushings and
replace if needed. Discard the support arm.
C
B
A
A
F Fiig gu urre e 2 22 2 –– H He ea ad d sse eccttiio on n ssu up pp po orrtt a arrm m
7. Reverse steps to reinstall.
8. Verify proper operation before you return the product to service.
H He ea ad d sse eccttiio on n a accttiivva attiio on n lle evve err rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• (2) 7/16” combination wrench
• #2 Phillips screwdriver
• 5/32” Allen wrench
1900-009-002 Rev AA.6 35 EN