Stryker CrossFlow, Service Manual

Page: 45 / 48

EN-43
DRAFT
Icon Name/Term Description
CROSSFLOW FOOTSWITCH Programs the settings for the CrossFlow footswitch
iSWITCH FOOTSWITCH Programs the settings for the iSwitch footswitch
CROSSFIRE FOOTSWITCH Programs the settings for the Crossfire footswitch
FORMULA SHAVER� Programs the settings for the Formula Shaver
USER PREFERENCE Loads User Preference files
USB UPLOAD Uploads/saves user preference settings from/to USB drive
RIGHT ARROW Moves a file to the right screen
LEFT ARROW Moves a file to the left screen
SEND PREFERENCE FILE TO
CROSSFIRE Sends a preference file to the Crossfire system
SETTINGS Navigates to the Settings screens
GENERAL SETTINGS Adjusts the volume, brightness, and language
VOLUME Adjusts the volume of pump
BRIGHTNESS Adjusts the monitor brightness
SOFTWARE UPGRADE Loads new software upgrades from a USB drive
ACTUAL PRESSURE DISPLAY
ICON SELECTION Selects the Actual Pressure Display icon
STRYKER SETTINGS Password-protected settings, for Stryker use only
— FLOW The fluid entering and exiting the joint; keeps the joint space
clear by removing loose tissue, debris, and fluid from the joint�
— FLOW LIMIT The maximum flow rate�
— FLOW RATE The speed at which fluid enters and exits the joint; measured
as volume over time, or liters per minute (L/min)�
— PRIME To remove air from the inflow tubing prior to pumping fluid
through the tubing�
— SUCTION The force required to pull loose tissue, debris, and fluid from
the joint�