manualshive.com logo in svg

Stryker 1688 Series, Manual, Page: 39 / 68

Share
Download
Stryker 1688 Series Manual Download Page 39

35

IRIS Menu

Description

ON

Turn on Infrared Illumination System (IRIS) mode 

on the light source, which enables use of the IRIS 

Ureteral Kit when connected to a compatible light 

source

OFF

Turn off IRIS mode

CONTINUOUS

Set the IRIS light output to continuous (the laser 

energy is continuous)

PULSATING

Set the IRIS light output to pulsating (the laser 

energy pulses in a repeating pattern of 0.5 second 

on/0.5 second off (1 pulse cycle/second)

SPY Mode Menu

Description

OVERLAY

Change the SPY mode to Overlay (the console 

outputs a white light image with ICG fluorescence 

indicated by the color green)

CONTRAST

Change the SPY mode to Contrast (the console 

outputs an image with ICG fluorescence indicated 

by the color white; all other areas of the image 

appear dark)

ENV

Change the SPY mode to ENV (the console outputs 

a greyscale white light image with ICG fluorescence 

indicated by the color green)

Light Source Menu

Description

ACTIVATE

Turn on white light from the light source

STANDBY

Deactivate light output from the light source

LIGHT UP

Increase the white light brightness on the light 

source

LIGHT DOWN

Decrease the white light brightness on the light 

source

AUTOLIGHT ON

Turn on the Auto Light feature, which automatically 

adjusts light settings on the light source to meet 

optimal light output.

AUTOLIGHT OFF

Turn off the Auto Light feature

Summary of Contents for 1688 Series





































































Reviews:

No comments