Stryker 1688 Series, Manual, Page: 33 / 68

29
2. Gain:
Press the plus or minus button to increase or decrease the SPY
Gain level, which affects the fluorescing green appearance of the camera
image. Range: 1-10.
3. Brightness:
Press the plus or minus button to increase or decrease the
brightness appearance of the white light image in SPY mode. Range: 1-8.
4. SPY Mode On/Off: Press and briefly hold the button to toggle SPY mode
on or off.
Camera Settings Screen
The Camera Settings screen provides options for adjusting the camera
picture.
2
1. Brightness: Press the plus or minus button to increase or decrease the
brightness level. Range: 1-8.
2. Zoom: Press the plus or minus button to increase or decrease the level of
magnification. Range: 1-7.
1
Note: As the Zoom level changes, the camera will optimize the image by
automatically adjusting the Enhancement level.
1
3. Enhancement:
Press the plus or minus button to increase or decrease the
enhancement level (the apparent sharpness of the image). Range: 1-8.
1
Information provided is for software version 3.0.7 and higher. In previous software versions, the Zoom range is 1–5 and
the camera does not automatically adjust Enhancement. The software version appears on the boot up screen, or the user
can check by following these steps:
1. On the console Home screen, hold down the Settings button for about 5 seconds until the Advanced Settings
screen appears.
2. Press the System button.
3. Check the CCU version.
4. Click X in the top-right corner to return to the Home screen.